GoneDragRacing.com

It is true, the port exit is almost 2.15 and the header inside diameter is 1.90, which is a 1/4 inch difference. It still made 515 to the wheels at 5500 rpm, probably more than your car can. BTW Mikes old combo peaked in the upper 6000 rpm range around 6800 at 567 hp, so who's motor do you think makes more power??? This one will peak at 7000 when done. Fast Eddie, why don't you race me next spring in whatever your have vs the Malibu? Run what you brung. I'm in it for cash or just pleasure, you choose.

And Mike, I did appreciate the fact that you sold me the parts and helped me along the way, but that doesn't mean I have to lay low and not talk smack or talk shit. That was a business transaction, I did not ask for a Blow Job from you.

I hope that they are not when the motor alone in that car cost more than their entire cars do.

And the reason why the cars are not fixed is because I spend cash, not credit. I wait till I have the means to buy and or fix my cars / parts. I am not like others who have financial problems and thus marriages suffer and some have their houses forclosed on... just sayin!!!

Out of the mouth from the same guy who bashed the shit out of Rubright and his employees when they tossed your black Camaro out of his shop. And supposedly stole some of your parts, caused you owed them money, at least that is what you told one of your sponsors. Now you are back to kissing some serious ass and maybe something else, while your car is back there getting free storage and possibly pro bono worked on. Come to think of it, can I kiss some butt to Rubright, my Mustang may need some new living quarters soon.

Holy crap, sounds fast...
http://youtu.be/Ud0v4yL0yL4
10.70's on motor then a 9.16 on spray, guess that is a 400 shot.
http://youtu.be/CWizBwZZwPg

Good guess. 350 actually. A 73 nitrous jet (175) in each stage. Not bad for a pump gas 496 in a 3700 pound car on radials.

You King are right, for pump 93, that is pretty good. But I still got it covered and my E85 is from the pump also.

Not claiming he had you covered. Just what jets were in it. I give Ed alot of credit for his car. It car was built entirely by him in his garage. Motor,trans,rear,chassis and even the paint all done by him.

Let's just race this is getting played. This could of would of bullshit

I would like to see a list of all accomplishments from both of these shops that claim to be the ''kings'',track championships,wins? I'm sure the list would be very short or nonexistent.Car show trophies,test and tune time slips,and airport drags don't count.I would love to see these shops build a car for a class and actually try to compete,it would be a huge eye opener. This thread is a joke.Oh,and that guy Dafister is definitely not the king of grammar. He would give dana h a run for his money.

Wow, looks like I struck a nerve!!! Someone busts on another one of your FAILED builds (this malibu can't even make it off the dyno, at least the mustang manged to blow up twice on the track!) and you decide to get personal... I am not even going to try to defend myself against that kind of blatent BULLSHIT. Your not gonna drive any kind of stake into the relationship there, and trust me he knows your full of shit. Not only that, but now your crossing the friendly bench racing BS and into the straight personal insult world. I know for a fact you can't back up what you say from here on out and you better tread lightly .

This same BS must be coming from the same source who told me what a total dickbag MOOCH you are, ALWAYS hanging out at the shop and using there equipment and resources for FREE. Free, you know, your favorite word. You'd give your grandma a bikini wax for a set of header gaskets, and don't deny it. You don't need credit to build a car when you can just take up another shops time and resources at will. Best part is after TWO builds you STILL can't get one of them down the TRACK! HA! Your a clown cock. N-town knows it, P-town can read it here too. Your an island of misinformation and BS. Funny how this FAILABU can't rev over 5000rpms....hmmmmm. what's the common denominator here.....that's right, Botchella. The hack welded your header tubes didnt he, and know it wont rev. Probably 5lbs of welding slag in the tubes!

I know for a fact you can't back up what you say from here on out and you better tread lightly .

Oh Really, just come to 2546 West Main st. Jeffersonville Pa 19403 and find out any time between the hours of 12-4pm M-F.

: Why cant we ju st ALL GET ALONG???????

FEforlife wrote:

Out of the mouth from the same guy who bashed the shit out of Rubright and his employees when they tossed your black Camaro out of his shop. And supposedly stole some of your parts, caused you owed them money, at least that is what you told one of your sponsors. Now you are back to kissing some serious ass and maybe something else, while your car is back there getting free storage and possibly pro bono worked on. Come to think of it, can I kiss some butt to Rubright, my Mustang may need some new living quarters soon.


Wow, looks like I struck a nerve!!! Someone busts on another one of your FAILED builds (this malibu can't even make it off the dyno, at least the mustang manged to blow up twice on the track!) and you decide to get personal... I am not even going to try to defend myself against that kind of blatent BULLSHIT. Your not gonna drive any kind of stake into the relationship there, and trust me he knows your full of shit. Not only that, but now your crossing the friendly bench racing BS and into the straight personal insult world. I know for a fact you can't back up what you say from here on out and you better tread lightly .

This same BS must be coming from the same source who told me what a total dickbag MOOCH you are, ALWAYS hanging out at the shop and using there equipment and resources for FREE. Free, you know, your favorite word. You'd give your grandma a bikini wax for a set of header gaskets, and don't deny it. You don't need credit to build a car when you can just take up another shops time and resources at will. Best part is after TWO builds you STILL can't get one of them down the TRACK! HA! Your a clown cock. N-town knows it, P-town can read it here too. Your an island of misinformation and BS. Funny how this FAILABU can't rev over 5000rpms....hmmmmm. what's the common denominator here.....that's right, Botchella. The hack welded your header tubes didnt he, and know it wont rev. Probably 5lbs of welding slag in the tubes!


Actually,I considered myself good friends with both Josh and Vinny, I had them do 2 engines for the mustang and 1 for my towtruck that has over 160k miles already. I also steered to them about 4 other builds and will continue to do so. I do not consider my actions mooching, I also did errands and helped them out when needed. Maybe I need to take a good look at myself then???
FAILABU - that is actually funny

lets just race. how about we all go to zmax and run 4 cars at a time?

COOL!

You King are right, for pump 93, that is pretty good. But I still got it covered and my E85 is from the pump also.[/quote]
Not claiming he had you covered. Just what jets were in it. I give Ed alot of credit for his car. It car was built entirely by him in his garage. Motor,trans,rear,chassis and even the paint all done by him.[/quote]


So do I, Ed is a rare person who can do that much work and have the car run and look as well as it does. I may be an A-hole, but Ed you do have my respect.

Look so called Dana H, since we both do not have any cars to race. I will put my new 2011 Dodge tow truck up against your dual axle CAT powered dump truck any time on 202 or 76. We can race since we will both take forever to get up to the speed limit.

I would advise against this course of action FE, as soon as your truck realizes its going to be raced, its going to blow its radiator and throw a rod threw it's pan. After all, it's one of YOUR vehicles....

Let me make this clear. If you toolbags want to run me the slowest guy in pottstown just to make yourself feel like a big man than BRING IT. Bring your 9 sec cars ill run you with my 11 or 12 second car in the spring. Or you could come up anytime and ill get out the 4 banger with the broken clutch and Ill run you now. You guys know where I am every night. Ill take a loss I really dont care. Don't sit here and say nobody is stepping up I just did. Now for hitting below the belt on personal comment before that toolbag up the road wants you to post something like that about me. Lets just say I wouldnt want it to ruin my cheerful disposition lets keep personal shit out of this.